![]() ![]() ![]() Download and install a free TFTP server on your computer and put the asa image asa-k9.bin on the root directory of the tftp server. Connect the ASA ethernet 0/0 and your computer ethernet to the same network switch. The name of the Cisco ASA Image file that will be uploaded to the ASA through TFTP is asa-k9.bin. We will assign the ASA Ethernet 0/0 IP 10.1.1.200. The following instructions will walk you through how to configure the ASA in rommon to boot from a TFTP server, load it to normal mode, copy boot image file from TFTP to ASA again, and then re-load it to boot normally. It might also be a hardware issue with the ASA like a bad flash which means you would have to take it with Cisco or a hardware support provider! The above error could be occurring on startup because the ASA didn't have a boot file image, loaded with the wrong boot image or configured to boot from unavailable source. By: Mike Khzouz ASA rommon - Error 15: File not found unable to boot an image: ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |